Citizen Systems PD-04 - Manual (Page 17)

– 13 –
Installation of the Paper
This printer uses thermal print paper, and not an ink ribbon. There are four ways to
insert paper into the printer depending on the paper, the paper course and the roll
paper holder.
1 Inserting paper from the Rear.
2 Feeding Single Sheets From the Top
3 Using the roll paper holder
4 Feeding sheets from the Bottom
Inserting Paper from the Rear.
1 Turn the printer on.
[ If the paper depress lever is up,
please put it in the down position.
[ The error lamp will be blinking at this
time
2 Place the edge of the paper straight
forward into the insert slot.
[ As in the illustration on the right, push
the paper into the slot until it stops
against the inner apparatus (push until
the error lamp stops blinking and turns off).
In just a few seconds the paper will
automatically feed in and the printer will
enter the ready to print mode.
3 When the paper is inserted a little crookedly.
[ Pull up the paper depress lever and
press down the feed button until the
paper straightens.