Canon BJC-50 - Manual (Page 46)

.
.
44
5. Insert the sheet straight into the printer until it stops. Hold the sheet until the printer
roller grabs the sheet and feeds it partially into the printer then release the sheet.
If the sheet is not set straight, or if the sheet is less than 90 mm wide, the sheet will not feed
and will be ejected automatically from the feed slot. The printer will beep once and the error
lamp will light orange to indicate a feed error. Remove the sheet from the printer and insert
it again. If the error has left print data (the POWER lamp will be flashing), press the
RESUME button to finish printing.
6. Start the print job with your software application.
44