Dell 4350 Network Access Point - Manual (Page 146)

The Control Utility allows the user to manage multiple Dell Wireless 4350 Small Network Access Points on the network by allowing
the user to configure an alternative access point to the default access point presented by the Control Utility.
To configure an alternative access point, perform the following steps:
1. Click to select Configure Alternative AP.
2. Enter the IP Address and Subnet Mask of the access point to be configured into the IP Address and Subnet Mask fields.
3. Click Apply, the Control Utility will shutdown and after restarting will have connected to the desired Dell Wireless 4350 Small
Network Access Point.
Back to Top
Wireless Settings
·
Network Name (SSID)
The SSID is a unique network name. It is used to identify the wireless network. This name is used when connecting wireless
clients to your wireless network.
·
Channel
This is the radio channel over which a communication transmission occurs between the access point and a wireless client.
·
Default Settings
Resets the wireless settings to its factory defaults.
·
Apply