Optical or tape drives, Ette drive. see figure 3-5, Figure 3-5 – Dell POWEREDGE 840 User Manual

Page 49: See figure 3-5, Tte drive. see figure 3-5

Text mode
Original mode

Installing System Components

Figure 3-5.

Removing or Installing a Diskette Drive

Optical or Tape Drives

An optical drive is standard in the first external drive bay. An additional IDE or SCSI tape drive can be
installed in the second external drive bay. These drives connect either to the system board or to an
optional controller card.

NOTE:

Installing an additional optical drive in the second external drive bay is not supported.

diskette (3.5-inch) drive

externally accessible drive
bay

screws (2)

interface cable

power cable