Dell Alienware 13 (Late 2014) - Manual (Page 98)

Replacing the Display Panel
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1 Connect the display cable to the display panel and press down on the
connector latch to secure the cable.
2 Turn the display panel over.
3 Align the screw holes on the display panel with the screw holes on the
display back-cover.
4 Replace the screws that secure the display panel to the display back-cover.
Post-requisites
1 Replace the display bezel .
2 Replace the display assembly .
3 Follow the procedure from step 5 to step 9 in “Replacing the palm rest ”.
4 Follow the procedure from step 3 to step 7 in “Replacing the solid-state
drive ” .
5 Replace the base panel .
98