Dell Alienware 13 (Late 2014) - Manual (Page 67)

Replacing the Power-
Adapter Port
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Connect the power-adapter port cable to the system board.
2 Turn the system board over.
3 Replace the screws that secure the system board to the computer base.
4 Connect the speaker cable to the connector on the system board.
5 Align the power-adapter port to the computer base.
6 Align the screw hole on the power-adapter port bracket with the screw
hole on the power-adapter port.
7 Replace the screw that secures the power-adapter port bracket to the
power-adapter port.
Post-requisites
1 Replace the display assembly .
2 Follow the procedure from step 5 to step 9 in “Replacing the palm rest ”.
3 Follow the procedure from step 3 to step 7 in “Replacing the solid-state
drive ” .
4 Replace the base panel .
67