Dell Alienware 13 (Late 2014) - Manual (Page 94)

Replacing the Display Bezel
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1 Connect the logo-board cable to the logo board.
2 Slide the display-board cables to their respective connectors on the logo
board and press down the latches to secure the cables.
3 Turn the display bezel over.
4 Align the display bezel with the display back-cover and gently snap the
display bezel into place.
Post-requisites
1 Replace the display assembly .
2 Follow the procedure from step 5 to step 9 in “Replacing the palm rest ”.
3 Follow the procedure from step 3 to step 7 in “Replacing the solid-state
drive ” .
4 Replace the base panel .
94