Dell Alienware 13 (Late 2014) - Manual (Page 39)

Replacing the Palm Rest
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Replace the touchpad .
2 Replace the status-light board .
3 Replace the power-button board .
4 Replace the keyboard .
5 Connect the power-button board cable to the system board.
6 Align the palm-rest assembly on the computer base and snap it into place.
7 Close the display and turn the computer over.
8 Replace the screws that secure the palm-rest assembly to the computer
base.
9 Connect the keyboard cable and the keyboard-backlight cable to the
system board.
Post-requisites
1 Follow the procedure from step 3 to step 7 in “Replacing the solid-state
drive ” .
2 Replace the base panel .
39