Dell Alienware 13 (Late 2014) - Manual (Page 26)

Replacing the Solid-State
Drive
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when
handling the hard drive.
Procedure
1 Slide the solid-state drive into the slot on the solid-state drive assembly.
2 Replace the screw that secures the solid-state drive to the solid-state drive
assembly.
3 Align the screw holes on the solid-state drive assembly with the screw
holes on the computer base.
4 Replace the screws that secure the solid-state drive assembly to the
computer base.
5 Connect the solid-state drive cable to the system board.
6 Align the screw holes on the solid-state drive bracket with the screw holes
on the solid-state drive assembly.
7 Replace the screws that secure the solid-state drive bracket to the solid-
state drive assembly.
Post-requisites
Replace the base panel .
26