Dell Alienware 13 (Late 2014) - Manual (Page 105)

Replacing the Display Hinges
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1 Align the screw holes on the display hinges with the screw holes on the
display back-cover.
2 Replace the screws that secure the display hinges to the display back-
cover.
Post-requisites
1 Replace the display panel .
2 Replace the display bezel .
3 Replace the display assembly .
4 Follow the procedure from step 5 to step 9 in “Replacing the palm rest ”.
5 Follow the procedure from step 3 to step 7 in “Replacing the solid-state
drive ” .
6 Replace the base panel .
105