Dell Alienware 13 (Late 2014) - Manual (Page 110)

Replacing the Display Back-
Cover
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1 Place the display back-cover on a flat surface.
2 Adhere the display-board cable and the camera cable to the display back-
cover.
Post-requisites
1 Replace the camera .
2 Replace the display hinges .
3 Replace the display panel .
4 Replace the display bezel .
5 Replace the display assembly .
6 Follow the procedure from step 5 to step 9 in “Replacing the palm rest ”.
7 Follow the procedure from step 3 to step 7 in “Replacing the solid-state
drive ” .
8 Replace the base panel .
110