Dell PowerEdge C5230 - Manual (Page 92)

92 Using the System Setup Program
WARN_DIMM_PO
P_RULE_MINOR_
OUT_OF_ORDER 01h NODE CH DIMM X DIMM is
populated out of
order
and that it will not
be used. If slot 0
is empty then the
channel gets
disabled, if slot 1 is
empty but slot
0 and slot 2 are
populated then
MRC will try to
boot with the
DIMM
in slot 0 while
ignoring the
DIMM
in slot 2.
WARN_DIMM_PO
P_RULE_MINOR_I
NDEPENDENT_M
OD 02h NODE 2 X X Lockstep/Mirror
mode not enabled
due to unused
DIMM on
Channel
2, and MRC input
RAS_TO_INDP_E
N = 1. Switch to
Independent
Channel mode.
WARN_CLTT_DIS
ABLE 18h CLTT was
requested but
could not
be honored
Table 2-16. MRC Warning Code
Warning Major
Code Minor
Code Data (DWord) Descriptions
31:16 15:0 31:24 23:16 15:8 7:0