Installing a 2.5-inch hard drive – Dell PowerEdge C5230 User Manual

Page 111

Installing System Components

111

Installing a 2.5-inch Hard Drive

1 Align the 2.5-inch hard drive bracket on the new hard drive then replace

the four screws.

Figure 3-10. Aligning the 2.5" Hard Drive Bracket

NOTE:

The correct orientation of the bracket is with the arrow mark pointing

towards the hard drive connector.

2 Connect the hard drive to the hard drive board in the sled.

Figure 3-11. Connecting the 2.5" Hard Drive to the Hard Drive Board

3 Replace the sled hard drive bracket screws underneath the sled.

HDD0

2.5” HDD

HDD1

2.5” HDD

HDD2

2.5” HDD

HDD3

2.5” HDD