Dell PowerEdge C5230 - Manual (Page 63)

Using the System Setup Program 63
Boot Event
The BIOS downloads the system date and time to the BMC during POST
and logs a boot event. Software that parses the event log should not treat the
boot event as an error.
Table 2-1. POST Error Events
Byte
Field Value Description
1:2 Record ID XXXXh ID Used for SEL Record access
3 Record Type 02h 02h = system event record
4:7 Time Stamp XXXXXXXXh Time when event was logged
8:9 Generator ID 0100h Generate by BIOS
10 EvM Rev 04h Event Message Format Revision.
04h for this specification
11 Sensor Type 0Fh Sensor type code for sensor that
generated the event
12 Sensor Number DAh Number of Sensor that generated
the event
13 Event Dir | Event
Type
00h Bit 7 0 = Assert Event
Bit 6:0 Event Type Code
14 Event Data 1 A0h Bit 7:6 10b = LSB POST error
code in byte 2
Bit 5:4 10b = MSB POST error
code in byte 3
Bit 3:0 Offset from Event/Reading
Code for discrete
event status
15 Event Data 2 XXh POST error code, LSB
16 Event Data 3 XXh POST error code, LSB