Dell PowerEdge C5230 - Manual (Page 40)

40 Using the System Setup Program
Internet Protocol IP4*
IP6
Autoconfigure Initiator IP address is
system assigned in IP6
mode. In
Autoconfigure mode,
iSCSI driver will attempt to
connect iSCSI target via
IPv4 stack, if failed then
attempt IPv6 stack.
Connect Retry Count The minimum value is 0
and the maximum is 16. 0
means no retry.
Connection Establishing
Time out
The timeout value in
milliseconds. The
minimum value
is 100 milliseconds and the
maximum is 20 seconds.
ISID Information only.
Display MAC Address.
Enable DHCP Disabled*
Enabled Enable DHCP
Initiator IP address Enter IP address in dotted-
decimal notation.
Initiator Subnet Mask Enter IP address in dotted-
decimal notation.
Gateway Enter IP address in dotted-
decimal notation.
Target Name The worldwide unique
name of iSCSI Initator.
Only IQN format is
accepted.
Target IP address Enter IP address in dotted-
decimal notation.
Target Port Target Port
Menu Fields Settings Comments