Dell PowerEdge C5230 - Manual (Page 29)

Using the System Setup Program 29
SATA Configuration
Figure 2-10. SATA Configuration Screen
Menu Fields Settings Comments
Advanced\SATA Configuration
Embedded SATA
Controller
Off
IDE
AHCI*
RAID Disables the SATA
controller or enables it and
sets the device class code as
IDE/AHCI/RAID. This
token applies to the first
on-board SATA controller.
Embedded SATA Link Rate Auto*
1.5 Gbps
3.0 Gbps
Forces the SATA port to
run at GEN1 mode if this
option is set to 1.5 Gbps.
Setting to Auto will leave
the port to run at default
mode.