Dell PowerEdge VRTX User Manual
Page 89
Error Code
Message Information
Action
Check chassis fabric type in CMC GUI and compare to the type of
IOM or PCIe mezzanine card.
HWC5004
Message
A link tuning failure detected on <
name
>.
Details
CMC has old firmware. After updating the firmware the CMC will
recognize the device.
Action
Update the CMC firmware. If the issue persists, see
HWC5006
Message
A failure is detected on <
name
>.
Action
HWC5008
Message
Console is not available for the <
name
>.
Action
HWC5010
Message
<
name
> cannot detect any hosts.
Action
HWC5014
Message
<
name
> is not functional and is powered off.
Action
HWC5031
Message
IO module <
number
> is offline.
Details
The CMC has powered off the IOM.
Action
HWC5032
Message
A fabric mismatch detected on IO module <
number
>.
Details
The fabric type for IOM's on the same chassis fabric must match.
Action
Check chassis fabric type in CMC GUI and compare to the type of
both IOM's.
HWC5034
Message
A link tuning failure detected on IO module <
number
>.
Details
Link tuning table not supported for this IO modular.
Action
Update the CMC firmware. If the issue persists, see
HWC5036
Message
A failure is detected on IO module <
number
>.
89