Dell PowerVault LTO3-060 - Manual (Page 41)

The options listed under System Operations include Compression, Barcode Reader, Cleaning Tape, Magazines, and System Time.
Compression
For the Dell PowerVault 124T LTO3-060-0 SAS autoloader, data compression is drive-dependent. The front panel and the RMU will display whether or not
compression is enabled.
Compressing the data means that the drive can write more data to the same amount of tape. Compression also increases the performance of the data
transfers.
To view the compression setting:
From any page, click the Configuration heading. The Configuration screen displays. Under the Compression heading, the current compression setting is
displayed as Compression Enabled or Compression Disabled.
Bar Code Reader
The bar code reader can be enabled or disabled. Disabling the bar code reader prevents the reader from attempting to read label information. If non-bar code
labels or no labels are being used, disabling the bar code reader will reduce initialization time at startup or system reset.
Either a power cycle (through the front panel button) or an autoloader reset (through the Autoloader Reset command found on the Error Logs and Diagnostics
page) is required for the setting change to take effect.
SCSI Barcode Length sets the maximum number of barcode characters that will be returned in the SCSI Read Element Data. The display of barcode information
on the Web interface and Operator Control Panel (OCP) are unaffected by this setting.
Setting the SCSI Barcode Length to 0 disables truncation of the barcode and the full barcode will be returned in the SCSI Read Element Data.
This setting is particularly useful if you have a pool of media previously catalogued by another device that has a limitation on the number of barcode characters
that can be read (typically 6 or 9). Adjusting the PV124T setting to match the previous hardware prevents the user from having to re-catalog all barcode
labeled media previously used in the other device.
The autoloader does not need to be reset when changing the Barcode Length.
To change the Barcode Reader settings:
1. From any page, click the Configuration heading. The Configuration Screen displays.
2. Under the Barcode Reader section, select the desired Enable/Disable option and Barcode Length setting and click Submit.
3. If the Enable/Disable option is changed, the message This will require a power cycle and host backup software configuration change will be displayed.
4. Select OK. The front panel and Web interface will display Please Power Cycle.
5. Either a power cycle (through the front panel button) or an autoloader reset (through the Autoloader Reset command found on the Error Logs and
Diagnostics page of the Web interface) is required for the change to take effect.
Cleaning Tape
To enable or disable the Auto Clean function, you must also designate a full slot for the cleaning tape cartridge. If a slot has not been designated, the box
displays None. To designate the cleaning tape slot:
1. Load a cleaning tape into an empty slot using the Library Operations page.
2. Enable or disable Auto Clean by selecting the check box. If autoclean is enabled, the cleaning cartridge will automatically be moved from the assigned
cleaning slot to the drive if the drive indicates cleaning is required.
To set Auto Clean:
1. From any page, click the Configuration heading. The Configuration screen displays.
2. Scroll to Cleaning Tape.
If a check mark appears in the box next to Auto Clean, the option is enabled. To disable Auto Clean, click the box to remove the check mark. If no check
mark appears in the box next to Auto Clean, the option is disabled. To enable Auto Clean, click the box to enter a check mark.
3. In the Cleaning Tape Location field, select the appropriate slot location where you installed the cleaning tape. If Auto Clean is disabled, cleaning is
handled by the backup package you have installed instead.
4. Click submit.
Setting the Magazines
This setting is used to report the number of storage elements and the element address to the host. This setting must match the physical configuration in order
for correct information to be reported. This setting only affects the information reported to the host. This setting does not affect the access to magazine slots
from the front panel or the RMU. Those interfaces are based on the physical configuration.
NOTE: Compression cannot be changed from the front panel or the RMU of the autoloader.
NOTE: If you do not use bar code labels on the media, you will have to manage the media manually.
NOTE: If Auto Clean is disabled, the cleaning tape will automatically be ejected through the media door (mailslot). Cleaning is handled by
the backup package you have installed instead.