CH Tech EM405D - Manual (Page 38)

B-2
Table B-1. Ethernet Interface Default Settings. (continued)
Active Connection
Active Connection None
Telnet Mod N/A
Terminal Type N/A
Remote Port N/A
Connection Response None
Modem Emulation Mode None
Use Host List N/A
Remote Host N/A
Disconnection
Disconnect with EOT N/A
Disconnect with DTRDrop False
Disable Hard Disconnect False
Inactivity Timeout 00:00
Connection
Connection LED Blink
Buffer Flushing
Flush Output Buffer
- At Time of Disconnect False
- On Passive Connection True
- On Active Connection False
Flush Input Buffer
- At Time of Disconnect False
- On Passive Connection True
- On Active Connection False
Packing
Enable Packing True
Send Trailing Bytes None
Send Frame Only False
Match Two Byte Sequence False
Idle Time Force Transmit 12ms
Match Byte 2 00
Match Byte 1 00
Device
Firmware Type N/A
Firmware Version N/A
Product Type N/A