Cyclades PM IPDU - Manual (Page 69)

Chapter 4: Command Line Interface 57
unassign
The unassign command removes the assignment of an outlet or group of outlets from a given user.
This command is available to the admin user only.
Syntax
unassign
Arguments
Outlet number, such as “5”, outlet name such as “sunfire”, or group of
outlets such as “1, 3-5”
Desired username
Examples
To unassign outlet 2 and 4 from user diderot, enter the following.
unlock
The unlock command unlocks an outlet or group of outlets in the current state. The response to this
command is a list of status lines, one per power port.
Syntax
unlock all|
Arguments
Outlet number, such as “5”, outlet name such as “sunfire”, or group of
outlets such as “1, 3-5”
all Unlocks all outlets in the PM IPDU or PM IPDU daisy chain
Examples
To unlock outlets 2, 3, 4, and 8, enter the following.
pm>unassign 2,4 diderot
2: Outlet no longer assigned to diderot.
4: Outlet no longer assigned to diderot.
pm>unlock 2-4,8
2: Outlet unlocked.
3: Outlet unlocked.
4: Outlet unlocked.
8: Outlet unlocked.