Cyclades PM IPDU - Manual (Page 52)

40 Cyclades PM IPDU Installer/Administrator/User Guide
Examples
To delete the user rog, enter the following.
display
The display command allows logical inversion of the 2-digit, 7-segment display. The purpose of
this command is to allow a PM IPDU to be mounted upside-down. This command is available to
the admin user only.
NOTE: The decimal point will be at the top of the display when the PM IPDU is mounted upside down.
Syntax
display [| [0|180]]
-or-
display
Arguments
no argument show display status of all PM IPDUs in the daisy chain
number of the PM IPDU in the chain
Identification string previously set by the id command
0 normal mode (default)
180 inverted display
Examples
To set the display if IPDU #2 to inverted mode, enter the following.
To set the display of IPDU #1 to normal mode, enter the following.
pm>deluser rog
Username deleted.
pm>display 2 180
IPDU #2: Display mode set to 180 degrees rotated.
pm>display 1 0
IPDU #1: Display mode set to normal.