Help – Cyclades PM IPDU User Manual
Page 54
42
Cyclades PM IPDU Installer/Administrator/User Guide
Examples
To reset the factory defaults, enter the following.
help
The help command displays the system help message for all commands or for a single command
when specified.
NOTE: When the admin user is logged in, the help command displays all commands. When a regular user is
logged in, the help command displays only the regular user commands.
Syntax
-or-
help
Arguments
Any available command
Examples
To view the system help message for a specific command, enter the command followed by
help
.
pm>factory_defaults 1
Setting configuration to defaults on IPDU #1
1: Outlet turned on.
2: Outlet turned on.
3: Outlet turned on.
4: Outlet turned on.
5: Outlet turned on.
6: Outlet turned on.
7: Outlet turned on.
8: Outlet turned on.
Saving configuration to flash on IPDU #1 ... done.
pm>syslog help
Usage: syslog
Turn the syslog messages on the console on or off