Passwd – Cyclades PM IPDU User Manual
Page 62
50
Cyclades PM IPDU Installer/Administrator/User Guide
on
The on command turns an outlet or a group of outlets on. If more than one outlet is selected there
will be an interval between outlets being powered on, the interval is defined by the interval
command. This command works on outlets in a PM IPDU daisy chain.
Syntax
on all|
Arguments
all
Turns on all outlets in the PM IPDU or PM IPDU daisy chain
Outlet number, such as “5”, outlet name such as “sunfire”, or group of outlets
such as “1, 3-5”
Examples
To turn on outlets 1, 3, 4, and 5, type:
passwd
The passwd command sets a password. The Administrator has a default password (pm8), which
may be changed. Regular users may change or set only their own password. The Administrator may
change his or her own password or any regular user’s password.
Syntax
passwd
Arguments
Name of the user whose password is being changed
no argument
To change admin password if logged in as admin. To change
logged in as
pm>on 1, 3-5
1: Outlet turned on.
3: Outlet turned on.
4: Outlet turned on.
5: Outlet turned on.