Dell KVM 2321DS - Manual (Page 77)

Controlling Your System at the Analog Ports 61
1 Press to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - PDUs.
3 Complete one of the following steps:
Select a PDU name, then click Settings to open the PDU Settings window.
-or-
Select a PDU name, then press to open the
PDU Settings
window.
-or-
Double-click on the PDU name to open the
PDU Settings window.
4 Complete any of the following steps:
a In the Name field, enter the PDU name.
b In the Cycle Delay field, enter the number of seconds you want the
Remote Console Switch to wait between turning off and turning on.
5 Click OK.
PDU Inlets window
From the Inlets window, you can view and modify inlet parameters.
NOTE: You can only modify inlet parameters on a PDU that is currently online.
To view/modify PDU Inlet settings:
1 Press to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - PDUs.
3 Complete one of the following steps:
Select a PDU name, then click Settings to open the PDU Settings window.
-or-
Select a PDU name, then press to open the
PDU Settings
window.
-or-
Double-click on the PDU name to open the
PDU Settings window.