Dell PowerEdge 650 - Manual (Page 43)

If no error messages occur during POST, continue to the next step.
If there are error messages, the system board might be faulty. See " Getting Help ."
10. Open the system. See " Opening the System ."
11. Remove the memory module from DIMM A and reinstall one of the memory modules that you removed in step 7 .
12. Close the system. See " Closing the System ."
If no error messages occur during POST, reinstall one of the memory modules that you removed in step 7 and repeat this step for the remaining memory
module.
If there are error messages, the memory module is faulty. Replace the memory module. See " System Memory ."
13. Run the system memory test in the system diagnostics. See " Running the System Diagnostics ."
If the test does not complete successfully, see " Getting Help ."
Troubleshooting the System Board
Problem
l Error message indicates a system board problem.
Action
1. Open the system. See " Opening the System ."
2. Remove the expansion cards, if installed. See " Removing an Expansion Card " in "Installing System Components."
3. Close the system. See " Closing the System ."
4. Run the system board tests in the system diagnostics. See " Running the System Diagnostics ."
If the tests do not run successfully, see " Getting Help ."
5. Open the system. See " Opening the System ."
6. Reinstall the one of the expansion cards that you removed in step 2 . See " Installing an Expansion Card " in "Installing System Components."
7. Close the system. See " Closing the System ."
8. Run the system board tests again.
If the tests do not complete successfully, the expansion card might be faulty. See " Getting Help ."
If the tests complete successfully, repeat step 5 through step 8 for the remaining expansion card, if applicable.
Troubleshooting a Diskette Drive
Problem
l Error message indicates a diskette drive problem.
Action