Scan features, Setting the scan settings in the computer, Scanning from network connected machine – Dell B1165nfw Multifunction Mono Laser Printer User Manual
Page 223
Scan features
223
4. Special Features
17
Setting the scan settings in the computer
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
1
Open Dell Printer Manager (see "Using Dell Printer Manager" on page
248).
2
Select the appropriate machine from the Printer List.
3
Select Scan to PC Settings menu.
4
Select the option you want.
•
Scan Activation: Determines whether or not scanning is enabled on
the device.
•
Basic tab: Contains settings related to general scan and device
settings.
•
Image tab: Contains settings related to image altering.
5
Press Save > OK.
18
Scanning from network connected machine
The machine that does not support the network interface, it will not be able
to use this feature (see "Rear view" on page 20).
Make sure the printer driver is installed on your computer using the software CD,
since the printer driver includes the scan program (see "Installing the driver
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 46).
2
Select (Scan) > Scan to PC > Network PC on the control panel.
Or select Scan > Network PC .
If you see Not Available message, check the port connection.
3
Select your registered computer ID, and enter the Password if
necessary.