Dell X50 Upgrade - Manual (Page 80)

www
.dell.com | support.dell.com
80
Operating the Axim
Editing a Drawing
To edit or format a drawing, you must first select it:
1 Tap and hold the stylus on the drawing until the selection handles appear.
To select multiple drawings, drag to select the drawings.
2 You can cut, copy, and paste selected drawings by tapping and holding
the selected drawings and then tapping an editing command on the
pop-up menu.
You can also tap Menu
→
Edit at the bottom of the screen to select
editing commands.
To resize a drawing, drag a selection handle.
Recording a Message
In any program where you can write or draw on the screen, you can also quickly
capture thoughts, reminders, and phone numbers by recording a message.
• In Calendar, Tasks, and Contacts, you can include a recording in the
Notes tab.
• In the Notes program, you can either create a stand-alone recording or
include a recording in a written note. If you want to include the
recording in a note, open the note first.
• In the Messaging program, you can add a recording to an e-mail message.
To record a message:
1 Hold the microphone near your mouth or other source of sound.
2 Press and hold the Record button on the side of your device until
it beeps.
3 While holding down the Record button, make your recording.
4 To stop recording, release the Record button.
The device beeps twice. The new recording appears in the note list or
as an embedded icon.
NOTE:
You can also make a recording by tapping the Record icon on the
Recording toolbar.
To play a recording, tap the name of the recording in the list or tap the
speaker icon in the note.