Canon IMAGECLASS MF5700 - Manual (Page 118)

Print Quality Problems 9-17
T
roub
lesh
oot
ing
9
Q Is the machine installed in a stable location?
A Install the machine in a proper location. (See “Installation,” on p. xiv.)
Copies are too dark or too light.
Q Is the exposure adjusted correctly?
A Adjust the exposure correctly using [Exposure]. (See “Adjusting the Exposure
(Density),” on p. 5-6.)
Q Is the machine in the toner saver mode?
A Set to in of the
Menu. (See <3. TONER SAVER MODE> of “Menu Descriptions.” on p. 10-4.)
The printouts are partly missing or shaded when you make copies on heavy paper.
Q Is the paper type set correctly?
A Select or in in
of the Menu. (See “Specifying the Paper Type,” on p.
2-11.)
The printouts are missing when you make copies on rough paper.
Q Is the paper type set correctly?
A Select in in of the
Menu. (See “Specifying the Paper Type,” on p. 2-11.)
The printous are missing when you make copies using the 2 on 1 copy function.
Q Are the documents A4-size or LTR-size?
A Be sure to use two sheets of A4-size or LTR-size documets when you make
copies using the 2 on 1 copy function.
The edges of copies are dirty when you make copies.
Q Is the paper size set correctly?
A Specify the appropriate paper size in in
of the Menu. (See “Specifying the Paper Size,” on p. 2-10.)