Dell 924 All-in-One Photo Printer - Manual (Page 25)

If your printer is attached to a network, you can scan photos or documents and have them sent to any
computer on the network.
Open the top cover. 1.
Place the document you want to scan face down on the scanner glass. Make sure the upper left corner
of the front of the document aligns with the arrow on the printer. 2.
Close the top cover. 3.
Press the up arrow button on the operator panel to change printer modes. When the LED displays
Scan , press the Menu button to save the selection.
4.
From the submenu, scroll through the available computers until you find the one you want to send your
photo or document to, and then press the Menu button to save the selection.
5.
The photo or document is scanned and sent to the specified computer.
NOTE: If your printer is connected locally, the Scan submenu does not appear; the host computer is
automatically selected.
Editing Scanned Text Using Optical Character Recognition
(OCR)
Optical Character Recognition (OCR) software converts a scanned image into editable text within a word-
processing program.
NOTE: Japanese and Chinese customers: Ensure you have OCR software installed on your computer.
A copy of OCR software was provided with your printer and should have installed at the same time as
your printer drivers.
Open the top cover. 1.
Place the document you want to scan face down on the scanner glass. Make sure the upper left corner
of the front of the document aligns with the arrow on the printer. 2.