Dell 924 All-in-One Photo Printer - Manual (Page 48)

Error
Code: Error
Message: What it indicates: Solution:
Blinking Power
Button The printer has a paper jam or is
out of paper. If a paper jam exists, see "Paper Problems"
on page 61 . If your printer is out of paper,
see "Loading Paper" on page 20.
Ink Low The ink cartridge is running low on
ink. The Low Ink Alert occurs
when your ink cartridges reach
levels of 25 percent, 15 percent,
and 5 percent remaining. Replace the ink cartridge. For more
information, see "Replacing Ink Cartridges"
on page 51.
Reserve Tank A print cartridge's available ink
dot count is zero. Order a new ink cartridge from Dell at
www.dell.com/supplies, and replace the
old ink cartridge.
1100 Paper jam A paper jam exists in the printer. Clear the paper jam. For more information,
see
Paper Problems .
1101 Paper out The printer is out of paper. Load more paper into the printer. For more
information, see
Loading Paper .
1102 Incorrect
print head
The ink cartridge is not valid. Replace the ink cartridge. For more
information, see
Replacing Ink Cartridges .
1103 Missing
print head
An ink cartridge has not been
installed. Install an ink cartridge in the empty carrier.
For more information, see
Replacing Ink
Cartridges .
1104 Print head
order
The ink cartridges have been
installed in the wrong carriers. Swap the ink cartridges. For more
information, see
Replacing Ink Cartridges .
1200 Print
carrier
stall
The ink cartridge carrier has
stalled. Disconnect the printer power cable, check
for paper jams, and then reconnect the
power cable.
1201 Print
incomplete
Data error or incomplete data.
Press the Power button to reset.
1203 Print head
short
Short circuit detected in the print
head. Disconnect and then reconnect the printer
power cable. Reinstall the ink cartridges. For
more information, see
Replacing Ink
Cartridges .
1204 Print head
programming
Unable to program print head ID. Reinstall the ink cartridges. For more
information, see
Replacing Ink Cartridges .
1205 Mono TSR
error
Problem in the mono TSR circuit. Reinstall the black ink cartridge. For more
information, see
Replacing Ink Cartridges .
1206 Color TSR
error
Problem in the color TSR circuit. Reinstall the color ink cartridge. For more
information, see
Replacing Ink Cartridges .
1208 Incorrect
home
position
The printer is unable to locate the
cartridge home position. Clear the carrier jam and press the Start
button .
2100 Unlock
scanner
The scan carrier has stalled. Turn off the printer, wait a few seconds, and
then turn on the printer.