Dell XPS 8300 (Late 2010) - Manual (Page 42)

42 PCI Express Cards
5 Connect any cables that should be attached to the card.
See the documentation that shipped with the card for information about
the card’s cable connections.
CAUTION: Do not route card cables over or behind the cards. Cables routed over
the cards can prevent the computer cover from closing properly or cause damage
to the equipment.
6 Replace the graphics card bracket, if applicable (see "Replacing the
Graphics Card Bracket" on page 32).
7 Replace the computer cover (see "Replacing the Computer Cover" on
page 18).
8 Reconnect the computer and devices to electrical outlets, and then turn
them on.
9 To complete the installation, see "Configuring Your Computer After
Removing or Installing the PCI Express Card" on page 42.
Configuring Your Computer After Removing or
Installing the PCI Express Card
NOTE: For information about the location of external connectors, see the Setup
Guide.
For information on installing drivers and software for your card, see the
documentation that shipped with the card.
book.book Page 42 Wednesday, April 25, 2012 12:34 PM