5 grasp the memory module and pull it upwards, Replacing the memory module(s) – Dell XPS 8300 (Late 2010) User Manual
Page 22
22
Memory Module(s)
5 Grasp the memory module and pull it upwards.
If the memory module is difficult to remove, gently ease the memory
module back and forth to remove it from the connector.
Replacing the Memory Module(s)
1 Follow the instructions in "Before You Begin" on page 13.
2 Press out the securing clip at each end of the memory module connector.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION:
Do not install ECC or DDR3U memory modules.
CAUTION:
If you remove the original memory module(s) from your computer
during a memory upgrade, keep them separate from any new module(s) that you
may have, even if you purchased the new module(s) from Dell. If possible, do not
pair an original memory module with a new memory module. Otherwise, your
computer may not start properly. The recommended memory configurations are:
matched memory module(s) installed in DIMM connectors 1 and 2 and another
matched memory module(s) installed in DIMM connectors 3 and 4.
1
memory module connector
2
securing clip
1
2
book.book Page 22 Wednesday, April 25, 2012 12:34 PM