Dell PowerEdge 1400SC - Manual (Page 41)

support.dell.com Installing and Configuring SCSI Drivers 3-7
SCSI Bus Interface Definitions:
Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Termination Enabled
Boot Device Options:
Boot Channel A First
Boot SCSI ID 0
Boot LUN Number 0
SCSI Device/Configuration:
Sync Transfer Rate MB/Sec 160
Initiate Wide Negotiation Yes (Enabled)
Enable Disconnection Yes (Enabled)
Send Start Unit Command Yes (Enabled)
Enable Write Back Cache Yes
BIOS Multiple LUN Support No (Enabled)
Include in BIOS Scan Yes (Enabled)
Advanced Configuration:
Reset SCSI Bus at IC Initialization Enabled
Display Message During BIOS Initialization Enabled
Extended BIOS Translation For DOS Drivers > 1 GB Enabled
Silent/Verbose Mode Verbose
Host Adapter BIOS Enabled
Domain Validation Enabled
Support Removable Disks Under BIOS As Fixed Disks Boot Only
BIOS Support For Bootable CD-ROM Enabled
BIOS Support For Int 13 Extensions Enabled
Support For Ultra SCSI Speed Enabled
NOTE: For the full name of an abbreviation or acronym used in this table, see the
“Glossary.”