Right side-panel(s), Removing the right-side top panel – Dell Alienware Aurora R3 (Early 2011) User Manual
Page 37

Back to Contents Page
Right Side-Panel(s)
Alienware Aurora Service Manual
Removing the Right-Side Top Panel
Replacing the Right-Side Top Panel
Removing the Right-Side Middle Panel
Replacing the Right-Side Middle Panel
Removing the Right-Side Bottom Panel
Replacing the Right-Side Bottom Panel
Removing the Right-Side Top Panel
1.
Follow the instructions in
Before You Begin
.
2.
Remove the left side-panel (see
Removing the Left Side-Panel
).
3.
Open the PCI shroud (see
Opening the PCI Shroud
).
4.
Remove the drive-bay shroud (see
Removing the Drive-Bay Shroud
).
5.
Remove the screw that secures the right-side top panel.
6.
Place the chassis in an upright position.
7.
Slide and pull the right-side top panel away from the chassis.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.
WARNING:
To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the side panel(s).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
screw