Left side-panel, Removing the left side-panel – Dell Alienware Aurora R3 (Early 2011) User Manual
Page 22
Back to Contents Page
Left Side-Panel
Alienware Aurora Service Manual
Removing the Left Side-Panel
1.
Follow the instructions in
Before You Begin
.
2.
Slide the latch to unlock the release panel.
3.
Lift the release panel to open the left-side panel.
4.
Slide and lift the left side-panel.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.
WARNING:
To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the side panel(s).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
NOTE:
Ensure that you remove the security cable from the security cable slot (if applicable).
NOTE:
Theater lighting (available only in Alienware Aurora ALX) turns on automatically when the left side-panel is removed.
1
release panel
2
security cable slot
3
latch
4
left side-panel