Processor, Removing the processor – Dell Alienware Aurora R3 (Early 2011) User Manual
Page 32
Back to Contents Page
Processor
Alienware Aurora Service Manual
Removing the Processor
1.
Follow the instructions in
Before You Begin
.
2.
Remove the left side-panel (see
Removing the Left Side-Panel
).
3.
Remove the processor liquid-cooling assembly (see
Removing the Processor Liquid-Cooling Assembly
).
4.
Press and push the release lever down and out and release it from the tab that secures it.
5.
Open the processor cover and gently lift the processor to remove it from the socket.
6.
Leave the release lever extended in the release position so that the socket is ready for the new processor.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.
WARNING:
To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the side panel(s).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
WARNING:
Despite having a plastic shield, the processor liquid-cooling assembly may be very hot during normal operation. Ensure that it has had
sufficient time to cool before you touch it.
1 processor 2 center-cover latch
3 tab
4 release lever
5 processor cover
CAUTION:
When removing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.