Display: dell xps m1710 service manual, Display, Removing the display assembly – Dell XPS M1710 (MXG061, Early 2006) User Manual
Page 42: Display assembly
Display: Dell XPS M1710 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/display.htm[2/21/2014 11:23:47 AM]
Display
Dell™ XPS™ M1710 Service Manual
Display Assembly
Removing the Display Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
) before working inside the computer.
1. Follow the instructions in
Before Working Inside Your Computer
.
2. Turn the computer upside down and loosen the two captive screws on the Mini-Card cover.
NOTE:
You must detach the Mini-Card antennas (see
) before you can remove the display assembly. If a Mini-
Card is installed, disconnect the antenna cables from the card. If one is not installed, detach the antenna cables from
their secured location.
3. Disconnect the antenna cables from the Mini-Card, if applicable.