beautypg.com

Replacing the video card/thermal-cooling assembly – Dell XPS M1710 (MXG061, Early 2006) User Manual

Page 21

background image

Video Card/Thermal-Cooling Assembly: Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/video.htm[2/21/2014 11:23:34 AM]

1 captive screws (4)

2 video card/thermal-cooling assembly

3 system board connector

Replacing the Video Card/Thermal-Cooling Assembly

NOTE:

Ensure that the video card/thermal-cooling assembly mylar flap rests on top of the processor thermal-cooling

assembly when the video card/thermal-cooling assembly is in place.

1. Carefully align the video card/thermal-cooling assembly over the connector on the system board and press down.

NOTE:

The video card/thermal-cooling assembly is labeled "PUSH HERE."

2. Tighten the four captive screws, labeled "1" through "4," in consecutive order.

Back to Contents Page

See also other documents in the category Dell Notebooks: