Dell XPS M1710 (MXG061, Early 2006) - Manual (Page 39)

System Board: Dell XPS M1710 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/sysboard.htm[2/21/2014 11:23:45 AM]
18. Remove the video card/thermal-cooling assembly, if present (see Removing the Video Card/Thermal- Cooling
Assembly ).
NOTE: Remove the video card/thermal-cooling assembly as a single unit. Do not separate the thermal-cooling
unit (heat sink) from the video card.
19. Remove the processor thermal-cooling assembly (see Removing the Processor Thermal-Cooling Assembly ).
20. Remove the processor (see Removing the Processor Module ).
21. Remove the docking frame:
a. Remove the remaining docking-frame screw.
b. Lift the docking frame away from the system board.
1 docking frame 2 docking frame screw
22. Remove the four M2.5 x 5-mm screws from the system board.