Dell S510 Interactive Projector - Manual (Page 48)

48 Using Your Projector
F ACTORY R ESET —Select Confirm and press to reset all settings to
its factory default. The below warning message appears:
Reset items include both computer sources and Video source
settings.
LAN S ETTINGS — Select and press to activate LAN settings. The LAN
settings menu provides the following options:
W IRELESS A ND LAN—Select Enabled to activate the Wireless and LAN
function. Select Disabled to deactivation the Wireless and LAN
function.
DHCP—If a DHCP server exists in the network to which the projector
is connected, the IP address will automatically be acquired when you
select DHCP On. If DHCP is Off, manually set the IP Address, Subnet
Mask, and Gateway. Use
and to select the number of IP
address, Subnet Mask, and Gateway. Key in enter to confirm each
number and then use
and to set the next item.
IP A DDRESS —Automatically or manually assigns the IP address to the
projector connected to the network.
S UBNET M ASK —Configure the Subnet Mask of the network connection.
G ATEWAY —Check the Gateway address with your network/system
administrator if you configure it manually.
DNS—Check the DNS Server IP address with your network/system
administrator if you configure it manually.
S TORE —Press to save the changes made in network configuration
settings.
NOTE: