Dell S510 Interactive Projector - Manual (Page 125)

Using Your Projector 125
Using the Tools Window
The following window is displayed when you click the Tools tab on the
operation window. You can use this window to change settings in the
projector that is currently connected.
Crestron Control
• Make settings for Crestron
®
central controllers.
Projector
Item Description
1 Projector Name Enter a name to differentiate the projector that
is currently connected from other projectors
on the network. (The name can contain up to
15 single-byte alphanumeric characters.)
2 Location Enter an installation location name for the
projector that is currently connected on the
network. (The name can contain up to 32
single-byte alphanumeric characters and
symbols.)
3 Assigned To Enter a user name for the projector. (The name
can contain up to 32 single-byte alphanumeric
characters and symbols.)