Using the on-screen display, Input source – Dell S510 Interactive Projector User Manual
Page 36
36
Using Your Projector
Using the On-Screen Display
• The projector has a multi-language On-Screen Display (OSD) Menu that
can be displayed with or without an input source.
• Press the Menu button on the remote control to enter the Main Menu.
• To navigate through the tabs in the Main Menu, press the
or
buttons on the remote control.
• To select a submenu, press the
or
button on the remote control.
• To select an option, press the
or
buttons on the remote control.
When an item is selected, the color changes to dark blue.
• Use the
or
buttons on the remote control to adjust the settings.
• To go back to the Main Menu, press the
button on the remote control.
• To exit the OSD, press the Menu button directly on the remote control.
INPUT SOURCE
The Input Source menu allows you to select your projector's input source.
VGA-A—
Press
to detect a VGA-A signal.
VGA-B—
Press
to detect a VGA-B signal.
HDMI-A/MHL—
Press
to detect a HDMI-A/MHL signal.
HDMI-B—
Press
to detect a HDMI-B signal.
W
IRELESS
/LAN—
Press
to activate the Input Source WIRELESS/LAN
menu.
NOTE:
The WIRELESS/LAN can be used after the "Wireless and LAN"
option is turned on.
USB—
Press
to activate the Input Source USB menu.
NOTE:
The USB can be used after the "Wireless and LAN" option is
turned on.
C
OMPOSITE
—
Press
to detect a Composite Video signal.