Universal setup – Dell 2350d/dn Mono Laser Printer User Manual

Page 22

From this
menu:

You can:

Recycled

Bond

Letterhead

Preprinted

Colored
Paper

Light
Paper

Heavy
Paper

Custom
Type
(where x
represents
1–6)

Determine whether 2-sided printing occurs for all jobs specifying a print
media type.

Duplex
Off*

*Factory default setting

Universal Setup

From
this
menu:

You can:

Units of
Measure

Specify the height, width, and feed direction of the Universal Paper Size.

Inches* (US)
Millimeters* (non-US)

Portrait
Width

Set the portrait width of the universal media.

3–14.17 inches
76–1219 mm

NOTE:

If the width exceeds the maximum, then the printer uses the

maximum width allowed.

NOTE:

8.5 inches is the US factory default setting. Inches can be

increased in 0.01-inch increments.

NOTE:

216 mm is the international factory default setting. Millimeters

can be increased in 1-mm increments.

Portrait
Height

Set the portrait height of the universal media.

3–14.17 inches
76–1219 mm

*Factory default setting