Dell 2350d/dn Mono Laser Printer - Manual (Page 29)

From the menu list, use the Arrow buttons to scroll the Parallel menu. 1.
Press the Select button . 2.
Press the Right Arrow button until the heading you want appears on the display, and then press
the Select button .
3.
Use the Arrow buttons to scroll through the available menu items. 4.
When the setting you want appears on the display, press the Select button to save the setting. 5.
Parallel Mode Main Menu
From this
menu: You can:
PCL
SmartSwitch Set the printer to automatically switch to PCL emulation when a print job
requires it, regardless of the default printer language.
On*
Off
PS
SmartSwitch Set the printer to automatically switch to PS emulation when a print job
requires it, regardless of the default printer language.
On*
Off
NPA Mode Send print jobs to the printer, and query printer status information at the
same time.
Off
Auto*
Parallel
Buffer Assign a size to the parallel input buffer.
Auto*
Disabled
3K to (in 1K increments).
Advanced
Status Enable bidirectional communication through the parallel port.
On*
Off
Protocol Specify the parallel interface protocol.
Receive information at a much higher transmission rate if the printer is set
* Factory default setting