Dell 2350d/dn Mono Laser Printer - Manual (Page 14)

Main Menu Mode Main Menu Mode Main Menu
Universal Setup Units of Measure
Portrait Width
Portrait Height
Feed Direction
*Factory default setting
From the menu list, use the Arrow buttons to scroll to the Paper menu. 1.
Press the Select button . 2.
Press the Right Arrow button until the heading you want appears on the display, and then press
the Select button .
3.
Use the Arrow buttons to scroll through the available menu items. 4.
When the setting you want appears on the display, press the Select button to save the setting. 5.
Paper Mode Main Menu
From this menu: You can:
Default Source Set a default paper
source for all print
jobs.
Tray *
MP Feeder
Manual Paper
Manual Env
NOTE: The items on
the default source
vary depending on
the device type and
the attachments
and/or supplies
installed on it. Size
and Type settings are
configured for each of
the listed Default
Source options under
Tray Configuration.
Configure MP Determine when the
Universal Setup Units of Measure
Portrait Width
Portrait Height
Feed Direction
*Factory default setting
From the menu list, use the Arrow buttons to scroll to the Paper menu. 1.
Press the Select button . 2.
Press the Right Arrow button until the heading you want appears on the display, and then press
the Select button .
3.
Use the Arrow buttons to scroll through the available menu items. 4.
When the setting you want appears on the display, press the Select button to save the setting. 5.
Paper Mode Main Menu