58 too many trays attached, 59 unsupported tray
Page 122

Remove the memory from your printer. Your printer supports up to 160 MB for a non-network printer and
288 MB for a network printer.

58 Too Many Trays Attached

Turn the printer off.

Unplug the power cord from the wall outlet.

Remove the excess trays.

Turn the printer back on.

59 Unsupported Tray

Remove the specified tray, and wait for the message to clear. You must remove the unsupported tray in
order to print.

Turn the printer off.

Unplug the power cord from the wall outlet.

Remove the unsupported tray.

Connect the power cord to a properly grounded outlet.

Turn the printer back on.

81 Engine Code CRC Failure

To ignore the message and continue printing, press the Back button

. The current job may not print

correctly.

Page 122