Dell Dimension E520 - Manual (Page 96)

96
Removing and Installing Parts
6 If you are installing a new floppy drive rather than replacing a drive, remove the appropriate drive-panel
insert (see "Removing the Drive-Panel Insert" on page 84).
7 Check all cable connections, and fold cables out of the way to avoid blocking airflow between the fan
and cooling vents.
8 Replace the drive panel (see "Replacing the Drive Panel" on page 85).
9 Replace the computer cover (see "Replacing the Computer Cover" on page 106).
NOTICE:
To connect a network cable, first plug the cable into the network device and then plug it into the
computer.
10 Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
11 Enter system setup (see "System Setup" on page 113) and select the appropriate Diskette Drive
option.
12 Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 50).
1 power cable 2 data cable
1
2