Dell Dimension E520 - Manual (Page 83)

Removing and Installing Parts
83
Removing the Drive Panel
1 Follow the procedures in "Before You Begin" on page 59.
2 Grasping the lever on the sliding plate, pull the sliding plate to the right until it snaps into the open
position.
NOTE:
This sliding plate secures and releases the drive panel and helps to secure the drives.
3 By pushing from the inside and pivoting the drive panel to the left, you can release the drive panel
from its side hinges.
4 Set the drive panel aside in a secure location.
1 sliding plate lever 2 sliding plate 3 drive panel
3
2
1