Dell Dimension E520 - Manual (Page 100)

100
Removing and Installing Parts
5 Connect the FlexBay USB cable to the back of the Media Card Reader and to the Media Card Reader
connector on the system board (see "System Board Components" on page 68).
6 Route the FlexBay USB cable through the cable routing clip.
7 Replace the computer cover (see "Replacing the Computer Cover" on page 106).
CD/DVD Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
Removing a CD/DVD Drive
1 Follow the procedures in "Before You Begin" on page 59.
2 Remove the drive panel (see "Removing the Drive Panel" on page 83).
1 Media Card Reader 2 FlexBay USB cable
2
1