Dell PowerVault MD3260i - Manual (Page 65)

3. Choose either Use existing Virtual Disks or Create a new Virtual Disks.
Figure 52. Virtual Disk Copy Target Dialog
4. Select the copy priority to use while establishing the new Virtual Disks copy.
5. Click Next.
6. Verify the Virtual Disks copy settings and click Finish to start the Virtual Disks copy.
Remove Copy Pair Command
The Remove Copy Pair command removes the relationship of the source and target of a Virtual Disks
copy pair. This does not remove the target Virtual Disks or the data residing on the target Virtual Disks. To
remove a Virtual Disks copy pair relationship:
1. Select the Virtual Disks copy pair to be removed.
2. Click Remove Copy Pair command.
The Remove Copy Pair dialog box is displayed.
3. Click OK to remove the Virtual Disks copy pair.
Recopy Command
The Recopy command will recopy all data from the source Virtual Disks to the target Virtual Disks of the
selected Virtual Disks copy pair.
CAUTION: All data residing on the target Virtual Disks will be overwritten with this option.
To recopy:
1. Select the Virtual Disks copy pair to use for the recopy.
2. Click Recopy command.
The Recopy dialog box is displayed.
3. Verify and click OK.
65